Tool lists: Difference between revisions
m (→Useful: added bullet points) |
m (=) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Here are some examples of tool lists | Here are some examples of tool lists from the ThinkTank mailing list | ||
==Bicycle-specific tools; with quantity recommendations (expendables are labeled "xInfinity")== | |||
== Bicycle-specific tools; with quantity recommendations (expendables are labeled "xInfinity") == | |||
=== Essential === | === Essential === | ||
| Line 203: | Line 104: | ||
* pickle fork/bearing puller x1 | * pickle fork/bearing puller x1 | ||
* mini grease gun x2 | * mini grease gun x2 | ||
== LARGE MOBILE KIT from [[BICAS]] in Arizona, USA == | |||
*15mm cone wrench x2 | |||
*13mm cone wrench x2 | |||
*cone wrench burrito (full set: 6mm-19mm) | |||
*pedal wrench | |||
*phillips screwdriver x3 | |||
*tiny phillips screwdriver | |||
*flathead screwdriver x2 | |||
*pin spanner | |||
*slot spanner | |||
*chainring bolt holder | |||
*spoke wrench 0 | |||
*spoke wrench 1 | |||
*spoke wrench 2 | |||
*socket tri tool 8, 9, 10mm | |||
*allen tri tool 4, 5, 6mm | |||
*small allen tri tool 2, 2.5, 3mm | |||
*lockring tool | |||
*large adjustable wrench | |||
*cable cutters | |||
*channel locks | |||
*vice grips | |||
*pliers | |||
*needle nose pliers | |||
*chain checker | |||
*crank arm bolt remover | |||
*crank puller | |||
*mallet/hammer | |||
*splined bottom bracket cup remover | |||
*freewheel keys | |||
*brake spring centering tool | |||
*allen key full set | |||
*5mm allen wrench | |||
*chain tool | |||
*brake center bolt wrench 8/10 | |||
*headset wrench 30/32 | |||
*headset wrench 40/36 | |||
*chain whip | |||
*3rd hand tool | |||
*4th hand tool (cable puller) | |||
*freewheel brush | |||
*19mm wrench | |||
*17mm wrench x2 | |||
*15mm wrench x3 | |||
*14mm wrench x2 | |||
*13mm wrench x2 | |||
*12mm wrench | |||
*10mm wrench x2 | |||
*9mm wrench x2 | |||
*8mm wrench x2 | |||
*7mm wrench | |||
*6mm wrench | |||
*6mm allen wrench | |||
*5mm allen wrench | |||
*8mm allen wrench | |||
*10mm allen wrench | |||
*long ¾ socket wrench | |||
*15 mm socket | |||
*chain ring bender | |||
*valve core stem remover | |||
*foldable allen tool | |||
*torx tri tool | |||
*tire levers | |||
*tweezers | |||
*push pins | |||
*ruler | |||
*measuring tape | |||
*patches | |||
*electrical tape | |||
*scissors | |||
*glue x2 (check still good) | |||
*grease | |||
*rubbing alcohol | |||
*zip ties | |||
*rags | |||
*bike aid | |||
*Triflow x2 (full) | |||
*extra chain tool pins | |||
*trashbag | |||
*1st aid kit | |||
*sunscreen [wiki editor's note: if you do a search for how many tons of sunscreen are in the ocean, you may rethink your sunscreen strategies] | |||
*gloves | |||
*brake pads | |||
*cables | |||
*housing | |||
*5mm ferrules | |||
*4 mm ferrules | |||
*cable crimps | |||
*bolts | |||
*nuts | |||
*washers | |||
*axle nuts | |||
*braze-on bolts | |||
*barrel adjusters | |||
*coaster brake arm brackets | |||
*Misc extra small parts | |||
Latest revision as of 21:37, 21 November 2021
Here are some examples of tool lists from the ThinkTank mailing list
Bicycle-specific tools; with quantity recommendations (expendables are labeled "xInfinity")
Essential
- chain checker (cheapest Park model, CC-3.2, is ok) x1
- tooth checker (KMC is cheaper than Rohloff) x2
- offest brake wrench set (10-13mm) x2
- offset brake wrench for springs (Park OBW-3)
- crank puller x4 octalink/isis crank puller x1
- pedal wrench x4 tire levers (pedros', or the newest Park types TL-4.2 or TL-6.2)
- xInfinity cone wrench set (14+15mm are the only ones you really need to start out,
- 13+16 are sometimes needed) x4 spoke wrench set (3.23mm, 3.30mm, 3.45mm, 3.96mm, or a multi size wrench) xHoweverManyTruingStandsYouHave
- Park PRS series workstand x4
- portable workstand (especially useful if prioritizing outside work) x4
- professional truing stand (Park TS-1x, TS-2x and BikeHand's Park TS
- clone are most utilitarian, followed by just about anything else not made with plastic) x2
- dishing stick/wheel alignment gauge x2
- cable cutters (Park, Shimano, Sunlite) x2
- master link pliers x1 shop quality chain breaker x4
- replacement pins for chain breaker xInfinity
- adjustable cup wrench (Park HCW-11) x2
- chainring nut/bolt wrench x4
- lubricants: grease (Park or waterproof marine grease), oil (White Lightning, triflow, or on a budget, Black Magic tire shine), penetrant (PBBlaster or WD40) xInfinity
- tri-hex (4, 5, 6mm) x4
- tri-socket (8, 9, 10mm) x4
- metric allen/hex set (preferable p or t handles with both ball and non-ball ends, Park PH-1.2 is ideal) x4
- spoke tensiometer x1
- headset and bottom bracket cup remover x1
- chain whip x4
- chainline checker x1
- derailer hanger alignment gauge x1
- air pumps (with presta capability, or presta/schraeder adapters if not) xInfinity
- adjustable pin spanner x1
- bottom bracket lockring wrench x4
- bottom bracket fixed cup wrench (36mm) x4
- cassette lockring and freewheel remover set (FR-1.3, FR-2, FR-3, FR-5.2, FR-6, FR-8, maillard) x2
- Park spoke, bearing, and cotter pin ruler (the engraved one, usually blue, not the screenprinted one) x2
- headset wrench set (Park HCW series 1-18) x4
- 20-spline bottom bracket tool x2
- tire patch kit xInfinity
Useful
- frame alignment gauge x1
- headset/bearing cup press x1
- crown race setter x1
- disc brake rotor truing tool x1
- threadless nut setter x1
- fourth hand tool/cable stretcher x2
- nipple driver x1
- adjustable spoke wrench x1
- axle vise x1
- rim straightener/dent remover (Bicycle Research) x1
- hydraulic brake bleed kit x1
- tire seater (Park PTS-1) x1
- cotter press x1
General tools; available from any hardware store, automotive store, garage sale, thrift store, or donated from non-bike folks, with quantity recommendations (expendables are labeled "xInfinity")
Essential
- crescent wrench (large) x1
- channel lock pliers x1
- phillips head screwdriver x4
- slip-joint pliers x4
- needle nose pliers x4
- full set of metric wrenches (up to 17mm) x4
- bolt cutter x1
- chain joining helper (bent wire in a stretched c-shape) x4
- hacksaw with spare blades (higher teeth counts are better for harder metals) x1
- small and large wire brush x4
- scissors x2
- vise grips x3
- bench vise x1
- PPE (hand sanitizer, disposable masks, safety goggles, earplugs, Narcan, First Aid Kit) xInfinity
- simple green xInfinity
- hand cleaners: goop, fast orange, or various home preparations such as "olive oil and salt" xInfinity
- pegboard+pegs (for organizing tools; alternatively plywood and finishing nails, though the latter is less reconfigurable) x4
- brushes, various sizes xInfinity
- rubber mallet x1
- ball peen hammer x2
- measurement calipers x4
- metric socket+driver set x2
- side cutters (also known as linesman's pliers) x4
- shop rags xInfinity [wiki editor's note: rag fires happen, just ask Bike Farm in Portland; they were closed for an entire summer because of a rag fire. store dirty rags in a fireproof container]
- utility hooks xInfinity
- durable shelves xinfinity
Useful
- 18+19mm wrenches x1
- chisel xInfinity
- breaker bars (can be made from any pipe, including unwanted bike frames) xInfinity
- pipe wrench (make sure the teeth aren't dull) x1
- drill (corded is cheaper and more powerful) x1
- drillbit set xInfinity
- file (half round and round are especially useful) xInfinity
- box cutter x2
- bench grinder with wire wheel x1
- pipe cutter x1
- steel wool xInfinity
- torque wrench x1
- metric torx set x1
- pickle fork/bearing puller x1
- mini grease gun x2
LARGE MOBILE KIT from BICAS in Arizona, USA
- 15mm cone wrench x2
- 13mm cone wrench x2
- cone wrench burrito (full set: 6mm-19mm)
- pedal wrench
- phillips screwdriver x3
- tiny phillips screwdriver
- flathead screwdriver x2
- pin spanner
- slot spanner
- chainring bolt holder
- spoke wrench 0
- spoke wrench 1
- spoke wrench 2
- socket tri tool 8, 9, 10mm
- allen tri tool 4, 5, 6mm
- small allen tri tool 2, 2.5, 3mm
- lockring tool
- large adjustable wrench
- cable cutters
- channel locks
- vice grips
- pliers
- needle nose pliers
- chain checker
- crank arm bolt remover
- crank puller
- mallet/hammer
- splined bottom bracket cup remover
- freewheel keys
- brake spring centering tool
- allen key full set
- 5mm allen wrench
- chain tool
- brake center bolt wrench 8/10
- headset wrench 30/32
- headset wrench 40/36
- chain whip
- 3rd hand tool
- 4th hand tool (cable puller)
- freewheel brush
- 19mm wrench
- 17mm wrench x2
- 15mm wrench x3
- 14mm wrench x2
- 13mm wrench x2
- 12mm wrench
- 10mm wrench x2
- 9mm wrench x2
- 8mm wrench x2
- 7mm wrench
- 6mm wrench
- 6mm allen wrench
- 5mm allen wrench
- 8mm allen wrench
- 10mm allen wrench
- long ¾ socket wrench
- 15 mm socket
- chain ring bender
- valve core stem remover
- foldable allen tool
- torx tri tool
- tire levers
- tweezers
- push pins
- ruler
- measuring tape
- patches
- electrical tape
- scissors
- glue x2 (check still good)
- grease
- rubbing alcohol
- zip ties
- rags
- bike aid
- Triflow x2 (full)
- extra chain tool pins
- trashbag
- 1st aid kit
- sunscreen [wiki editor's note: if you do a search for how many tons of sunscreen are in the ocean, you may rethink your sunscreen strategies]
- gloves
- brake pads
- cables
- housing
- 5mm ferrules
- 4 mm ferrules
- cable crimps
- bolts
- nuts
- washers
- axle nuts
- braze-on bolts
- barrel adjusters
- coaster brake arm brackets
- Misc extra small parts