Righty Tighty, Lefty Loosey: Difference between revisions

From Bike Collectives Wiki
mNo edit summary
No edit summary
Line 10: Line 10:


To tighten, turn to the right (as defined above).
To tighten, turn to the right (as defined above).
== See Also ==
* [[Shop Manual]]

Revision as of 01:02, 2 December 2007

The standard threading on any kind of hardware follows the righty tighty, lefty loosey pneumonic devise for unscrewing or tightening bolts, screws, etc.

Which way is left and which way is right?

Holding a wrench at the 12 o'clock position determines whether you are turning left or right. If the wrench (in the most upright, 12:00 position) falls to the left, you are going "lefty loosey." If the wrench falls to the right, you are going "righty tighty."

Directions

To loosen, turn to the left (as defined above).

To tighten, turn to the right (as defined above).

See Also