Measuring Spokes: Difference between revisions
No edit summary |
mNo edit summary |
||
Line 5: | Line 5: | ||
# Hook the spoke into the hole. | # Hook the spoke into the hole. | ||
# Pull the spoke | # Pull the spoke '''straight''', do not to angle it to one side or the other. | ||
# Check the length further down the ruler. | # Check the length further down the ruler. | ||
'''NOTE:''' The drawers in the spoke motel are 2mm apart; if the spoke is in between two sizes, file it with the shorter size. | '''NOTE:''' The drawers in the spoke motel are 2mm apart; if the spoke is in between two sizes, file it with the shorter size. |
Revision as of 18:44, 26 December 2006
Measuring spokes is a process made easy by a ruler (Park Tool SBC-1 Spoke Ruler) designed for the purpose. They are anodized blue and have special holes on them for hooking and measuring spokes.
- Hook the spoke into the hole.
- Pull the spoke straight, do not to angle it to one side or the other.
- Check the length further down the ruler.
NOTE: The drawers in the spoke motel are 2mm apart; if the spoke is in between two sizes, file it with the shorter size.