Measuring Spokes: Difference between revisions
mNo edit summary |
mNo edit summary |
||
Line 1: | Line 1: | ||
Measuring spokes is a process made easy by a ruler ([[Park Tool SBC-1 Spoke Ruler]]) designed for the purpose. They are anodized blue and have special holes on them for hooking and measuring spokes. | '''Measuring spokes''' is a process made easy by a ruler ([[Park Tool SBC-1 Spoke Ruler]]) designed for the purpose. They are anodized blue and have special holes on them for hooking and measuring spokes. | ||
[[Image:spoke1.jpg|thumb|Hook the spoke into the hole.]] | [[Image:spoke1.jpg|thumb|Hook the spoke into the hole.]] |
Revision as of 18:44, 26 December 2006
Measuring spokes is a process made easy by a ruler (Park Tool SBC-1 Spoke Ruler) designed for the purpose. They are anodized blue and have special holes on them for hooking and measuring spokes.
- Hook the spoke into the hole.
- Pull the spoke straight, do not to angle it to one side or the other.
- Check the length further down the ruler.
NOTE: The drawers in the spoke motel are 2mm apart; if the spoke is in between two sizes, file it with the shorter size.