Axle Vice: Difference between revisions
m (→Directions) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
[[Image:ParkToolAV_1AxleVice.jpg|thumb|Park Tool AV-1 Axle Vice]] | [[Image:ParkToolAV_1AxleVice.jpg|thumb|Park Tool AV-1 Axle Vice]] | ||
[[Image:ParkToolAV_4AxleVice.jpg|thumb|Park Tool AV-4 Axle Vice]] | [[Image:ParkToolAV_4AxleVice.jpg|thumb|Park Tool AV-4 Axle Vice]] | ||
[[Image:ParkToolAV_3AxleVice.jpg|thumb|Park Tool AV-3 Axle Vice]] | |||
The '''axle vice''' holds the axle in a [[bench vice]] without damaging the threads or allowing it to turn while working on a hub. They have different diameter holes for axles with different diameters. | The '''axle vice''' holds the axle in a [[bench vice]] without damaging the threads or allowing it to turn while working on a hub. They have different diameter holes for axles with different diameters. | ||
Revision as of 19:55, 13 January 2007
The axle vice holds the axle in a bench vice without damaging the threads or allowing it to turn while working on a hub. They have different diameter holes for axles with different diameters.
Directions
- Insert the axle into the proper diameter opening
- Tighten the bench vise.
- Repack the Hub or whatever you need to do.
- Loosen the bench vice.
NOTE: The axle vice jaws will open automatically when the vise is opened.


