Shop Manual: Difference between revisions
| Line 22: | Line 22: | ||
* [[Bottom Bracket]] | * [[Bottom Bracket]] | ||
* [[Building a Fixed Gear]] - All the cool kids are doing it... | * [[Building a Fixed Gear]] - All the cool kids are doing it... | ||
* [[Chain rings]] | |||
* [[Cranks]] | * [[Cranks]] | ||
* [[Diamond Handlebar Wrap]]- It's ain't style if it ain't ''FUNKY'' | * [[Diamond Handlebar Wrap]]- It's ain't style if it ain't ''FUNKY'' | ||
Revision as of 23:35, 13 July 2007
Shop Manual
This manual, originally started by the Ohio City Bicycle Co-op, is a collaborative effort designed to help you have a better time volunteering. It's much easier to have a good time if the job you're doing is easier, and we hope to make it easier by providing explanations that you can use to learn new tasks or remember how to do ones you've done before. Enjoy!
Beginner
- Despoking Wheels - Despoking wheels
- Inflating Tubes - Inflating tubes / tires
- Lefty Loosey, Righty Tighty
- Loosening, see Lefty Loosey, Righty Tighty
- Tightening, see Lefty Loosey, Righty Tighty
- Wheel Care - Cleaning and lubing wheels
Intermediate
- Checking Tubes - Checking innertubes for leaks
- Tired Wheels - The OCBC procedure for handling wheels with tires on them
- Removing Tires - How to remove a tire
- Brakes - Evaluation and repair
- Derailleurs
Advanced
- Bike Evaluation - How to evaluate a bike and decide its fate
- Bottom Bracket
- Building a Fixed Gear - All the cool kids are doing it...
- Chain rings
- Cranks
- Diamond Handlebar Wrap- It's ain't style if it ain't FUNKY
- Repacking Hubs - Remedy if the wheel's axle does rotate right, at all, or in the wrong direction.
- Tuning for sale - How to prepare a bike to be sold
- Wheel Building - Ever wondered how to build a wheel from scratch?
- Wheel Evaluation - How to determine whether a wheel is good or worth fixing
- Wheel Truing - Bumpy ride?
General information on parts and using tools
Parts
- Definitions
- Handlebars - Types of Handlebars and how to sort them
- Tube Valves - The two types of valves commonly seen on tubes
- Wheel Sizes - The different sizes of wheels and tires
Tools
- Using Calipers - How to measure using calipers
- Measuring Spokes - How to measure the length of a spoke
- Spoke Wrenches - How to know which one you need
- Truing Stand - How to place a wheel into the truing stand correctly
- Shop Supplies - Necessities taken for granted.
Evaluating Parts
- Evaluating Saddles - Saddles are either good, free, or ruined
- Evaluating Handlebars - How to tell whether handlebars are usable
- Evaluating Pedals - Which things are ok, and which can't be fixed
- Evaluating Stems - How to know that they have their parts and aren't cracked
- Evaluating Brake Levers - Making sure they are ready to be used
- Evaluating Hubs - Our standards for keeping hubs
- Evaluating Front Derailleurs - All of the important parts
- Evaluating Derailleurs - The important parts for rear derailleurs
- Evaluating Helmets - How to sort helmets by condition
Sorting Parts
- Sorting Spokes - Measuring length and width, and how to use the motel
- Sorting Saddles - Sorting saddles by width and construction
- Sorting Handlebars - Separating road from mountain and good from free
- Sorting Pedals - Sorting pedals by size and type, and pairing them
- Sorting Stems - Sorting quill stems by length and diameter
- Sorting Brake Levers - Sorting flat bar levers from road levers
- Sorting Brake Calipers - Telling caliper from cantilever, and sorting caliper brakes
- Sorting Cranks - Different kinds of cranks and what to do with them
- Sorting Derailleurs - Separating front from rear
- Sorting Front Derailleurs - Sorting doubles from triples
- Sorting Rear Derailleurs - Sorting the four categories of rear derailleurs